Passive2:Inner Loads - Versionsgeschichte

SebSta: /* Residential building */

2014-06-10T08:07:36Z

Residential building

← Nächstältere Version		Version vom 10. Juni 2014, 10:07 Uhr
Zeile 2:		Zeile 2:
	For non-residential buildings, the occupancy as well as kitchen and office appliances need to be defined and attached to a utilization pattern.		For non-residential buildings, the occupancy as well as kitchen and office appliances need to be defined and attached to a utilization pattern.
	== Residential building ==		== Residential building ==
	[[Bild:Passive-innerloads.png\|Inner Loads\|right\|thumb]]~~<br>~~		[[Bild:Passive-innerloads.png\|Inner Loads\|right\|thumb]]
	In this section electric devices and humidity sources are defined. They are important to estimate the energy and water demand as well as the humidity load inside the building. In the device scope, WUFI offers a lot of common household devices (dishwater, etc.) as well as the option to implement a different device.		In this section electric devices and humidity sources are defined. They are important to estimate the energy and water demand as well as the humidity load inside the building. In the device scope, WUFI offers a lot of common household devices (dishwater, etc.) as well as the option to implement a different device.
	[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>		[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>
	For each device, the quantity and the energy demand are needed. Additional data is needed for some devices: E.g. the dishwasher can be connected with the DHW or cold water.<br>		For each device, the quantity and the energy demand are needed. Additional data is needed for some devices: E.g. the dishwasher can be connected with the DHW or cold water.<br>
	If the ~~inner sources~~ of ~~the building~~ are not known yet, WUFI contains a standard set of devices in a common household which can be used by clicking on "standard dataset".		If the exact number or type of household appliances are not known yet, WUFI contains a standard set of devices in a common household which can be used by clicking on "standard dataset", though they do not contain predefined energy consumptions or similar requirements.
	<br style="clear:both" />		<br style="clear:both" />

LisaWhite am 28. Mai 2014 um 22:14 Uhr

2014-05-28T22:14:54Z

← Nächstältere Version		Version vom 29. Mai 2014, 00:14 Uhr
Zeile 12:		Zeile 12:
	=== Utilization pattern ===		=== Utilization pattern ===
	[[Bild:Passive-innerloads_nonres_utipattern.png\|thumb\|right\|Utilization pattern]]		[[Bild:Passive-innerloads_nonres_utipattern.png\|thumb\|right\|Utilization pattern]]
	The mandatory data for utilization patterns is given ~~over~~ the columns of the table. The additional data is useful, depending on where the pattern is attached.		The mandatory data for utilization patterns is given in the columns of the table. The additional data is useful, depending on where the pattern is attached.
	<br style="clear:both" />		<br style="clear:both" />
	=== Occupancy ===		=== Occupancy ===

LisaWhite am 19. Mai 2014 um 22:19 Uhr

2014-05-19T22:19:04Z

← Nächstältere Version		Version vom 20. Mai 2014, 00:19 Uhr
Zeile 6:		Zeile 6:
	[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>		[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>
	For each device, the quantity and the energy demand are needed. Additional data is needed for some devices: E.g. the dishwasher can be connected with the DHW or cold water.<br>		For each device, the quantity and the energy demand are needed. Additional data is needed for some devices: E.g. the dishwasher can be connected with the DHW or cold water.<br>
	~~In case~~ the inner sources of the building are not known yet, WUFI contains a standard set of devices in a common household which can be used by clicking on "standard dataset".		If the inner sources of the building are not known yet, WUFI contains a standard set of devices in a common household which can be used by clicking on "standard dataset".
	<br style="clear:both" />		<br style="clear:both" />

Zeile 16:		Zeile 16:
	=== Occupancy ===		=== Occupancy ===
	[[Bild:Passive-innerloads_nonres_occupancy.png\|right\|thumb\|Occupancy]]		[[Bild:Passive-innerloads_nonres_occupancy.png\|right\|thumb\|Occupancy]]
	Here the number of occupants of the building is defined as well as ~~its~~ humidity sources. When it comes to the activity of the occupants, WUFI can differ between children, sitting adults and standing adults. It is also possible to define the pattern for these people as well the quantity of people following this pattern. <br>		Here the number of occupants of the building is defined as well as humidity sources. When it comes to the activity of the occupants, WUFI can differ between children, sitting adults and standing adults. It is also possible to define the pattern for these people as well the quantity of people following this pattern. <br>
	The additional data section contains a value about additional heat losses through evaporation and toilet usage/settings.<br>		The additional data section contains a value about additional heat losses through evaporation and toilet usage/settings.<br>
	If the simulated building is a school, WUFI has default values for it.		If the simulated building is a school, WUFI has default values for it.
Zeile 34:		Zeile 34:
	=== Lighting ===		=== Lighting ===
	[[Bild:Passive-innerloads_nonres_lighting.png\|thumb\|right\|Lighting]]		[[Bild:Passive-innerloads_nonres_lighting.png\|thumb\|right\|Lighting]]
	The required lighting is estimated depending on the amount of ~~entering sunlight~~. Therefore data on room geometry, glass transparency and occupancy (utilization pattern) is needed.		The required lighting is estimated depending on the amount of daylighting. Therefore data on room geometry, glass transparency and occupancy (utilization pattern) is needed.

LisaWhite am 19. Mai 2014 um 21:12 Uhr

2014-05-19T21:12:44Z

← Nächstältere Version		Version vom 19. Mai 2014, 23:12 Uhr
Zeile 29:		Zeile 29:
	=== Kitchen equipment ===		=== Kitchen equipment ===
	[[Bild:Passive-innerloads_nonres_kitchequipment.png\|thumb\|right\|Kitchen equipment]]		[[Bild:Passive-innerloads_nonres_kitchequipment.png\|thumb\|right\|Kitchen equipment]]
	Kitchen appliances can be defined here, WUFI provides the options cooktop, dishwasher and refrigerator. Use the "user defined" scope if different appliances are needed.		Kitchen appliances can be defined here. WUFI provides the options cooktop, dishwasher and refrigerator. Use the "user defined" scope if different appliances are needed.
	<br style="clear:both" />		<br style="clear:both" />

	=== Lighting ===		=== Lighting ===
	[[Bild:Passive-innerloads_nonres_lighting.png\|thumb\|right\|Lighting]]		[[Bild:Passive-innerloads_nonres_lighting.png\|thumb\|right\|Lighting]]
	The required lighting is estimated depending on the amount of entering sunlight. Therefore data of room geometry, glass transparency and occupancy (utilization pattern) is needed.		The required lighting is estimated depending on the amount of entering sunlight. Therefore data on room geometry, glass transparency and occupancy (utilization pattern) is needed.

LisaWhite am 19. Mai 2014 um 21:11 Uhr

2014-05-19T21:11:09Z

← Nächstältere Version		Version vom 19. Mai 2014, 23:11 Uhr
Zeile 1:		Zeile 1:
	Depending on which building type is chosen, this section offers different input options. If a residential building is simulated in WUFI, only common household appliances and lighting ~~have~~ to be defined.<br>		Depending on which building type is chosen, this section offers different input options. If a residential building is simulated in WUFI, only common household appliances and lighting need to be defined.<br>
	For non-residential buildings, kitchen and office appliances ~~as well as the occupancy has~~ to be defined and attached to a utilization pattern.		For non-residential buildings, the occupancy as well as kitchen and office appliances need to be defined and attached to a utilization pattern.
	== Residential building ==		== Residential building ==
	[[Bild:Passive-innerloads.png\|Inner Loads\|right\|thumb]]<br>		[[Bild:Passive-innerloads.png\|Inner Loads\|right\|thumb]]<br>
	In this section electric devices and humidity sources are defined. They are important to estimate the energy and water demand, as well as the humidity load inside the building. In the device scope, WUFI offers a lot of common household devices, ~~like dishwater~~ etc. as well as the option to implement a different device.		In this section electric devices and humidity sources are defined. They are important to estimate the energy and water demand as well as the humidity load inside the building. In the device scope, WUFI offers a lot of common household devices (dishwater, etc.) as well as the option to implement a different device.
	[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>		[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>
	For each device, the quantity and the energy demand are needed ~~and depending on the devices itself, additional~~ data is needed: E.g. the dishwasher can be connected with the DHW or cold water.<br>		For each device, the quantity and the energy demand are needed. Additional data is needed for some devices: E.g. the dishwasher can be connected with the DHW or cold water.<br>
	In case the inner sources of the building are not known yet, WUFI contains a standard set of devices in a common household which can be used by clicking on "~~standart~~ dataset".		In case the inner sources of the building are not known yet, WUFI contains a standard set of devices in a common household which can be used by clicking on "standard dataset".
	<br style="clear:both" />		<br style="clear:both" />

Zeile 23:		Zeile 23:
	=== Office equipment ===		=== Office equipment ===
	[[Bild:Passive-innerloads_nonres_offequipment.png\|thumb\|right\|Office equipment]]		[[Bild:Passive-innerloads_nonres_offequipment.png\|thumb\|right\|Office equipment]]
	Any office equipment can be enumerated here. WUFI itself knows the following devices: PC, monitor, copier, printer, server and the telephone system. If different ~~ones~~ are needed, they can be inserted in the "user defined" scope. "User defined" devices can not be attached to a utilization pattern, therefore the utilization hours/year have to be given.<br>		Any office equipment can be enumerated here. WUFI itself knows the following devices: PC, monitor, copier, printer, server and the telephone system. If different devices are needed, they can be inserted in the "user defined" scope. "User defined" devices can not be attached to a utilization pattern, therefore the utilization hours/year have to be given.<br>
	The printer and copier also have an additional data section. The hours of utilization in energy saving mode in hours/year can be defined, but are optional.		The printer and copier also have an additional data section. The hours of utilization in energy saving mode in hours/year can be defined, but are optional.
	<br style="clear:both" />		<br style="clear:both" />
Zeile 29:		Zeile 29:
	=== Kitchen equipment ===		=== Kitchen equipment ===
	[[Bild:Passive-innerloads_nonres_kitchequipment.png\|thumb\|right\|Kitchen equipment]]		[[Bild:Passive-innerloads_nonres_kitchequipment.png\|thumb\|right\|Kitchen equipment]]
	Kitchen appliances can be defined here, WUFI provides the options cooktop, dishwasher and ~~refirgerator~~. Use the "user defined" scope if different appliances are needed.		Kitchen appliances can be defined here, WUFI provides the options cooktop, dishwasher and refrigerator. Use the "user defined" scope if different appliances are needed.
	<br style="clear:both" />		<br style="clear:both" />

	=== Lighting ===		=== Lighting ===
	[[Bild:Passive-innerloads_nonres_lighting.png\|thumb\|right\|Lighting]]		[[Bild:Passive-innerloads_nonres_lighting.png\|thumb\|right\|Lighting]]
	~~Depending~~ on the entering sunlight ~~the required lighting is estimated~~. Therefore data of room geometry, glass ~~transparancy~~ and occupancy (utilization pattern) is needed.		The required lighting is estimated depending on the amount of entering sunlight. Therefore data of room geometry, glass transparency and occupancy (utilization pattern) is needed.

SebSta: /* Office equipment */

2013-07-23T13:45:43Z

Office equipment

← Nächstältere Version		Version vom 23. Juli 2013, 15:45 Uhr
Zeile 24:		Zeile 24:
	[[Bild:Passive-innerloads_nonres_offequipment.png\|thumb\|right\|Office equipment]]		[[Bild:Passive-innerloads_nonres_offequipment.png\|thumb\|right\|Office equipment]]
	Any office equipment can be enumerated here. WUFI itself knows the following devices: PC, monitor, copier, printer, server and the telephone system. If different ones are needed, they can be inserted in the "user defined" scope. "User defined" devices can not be attached to a utilization pattern, therefore the utilization hours/year have to be given.<br>		Any office equipment can be enumerated here. WUFI itself knows the following devices: PC, monitor, copier, printer, server and the telephone system. If different ones are needed, they can be inserted in the "user defined" scope. "User defined" devices can not be attached to a utilization pattern, therefore the utilization hours/year have to be given.<br>
	The printer and copier also have an additional data section. The hours of utilization in energy ~~saveing~~ mode in hours/year can be defined, but are optional.		The printer and copier also have an additional data section. The hours of utilization in energy saving mode in hours/year can be defined, but are optional.
	<br style="clear:both" />		<br style="clear:both" />

SebSta: /* Office equipment */

2013-07-23T13:45:02Z

Office equipment

← Nächstältere Version		Version vom 23. Juli 2013, 15:45 Uhr
Zeile 23:		Zeile 23:
	=== Office equipment ===		=== Office equipment ===
	[[Bild:Passive-innerloads_nonres_offequipment.png\|thumb\|right\|Office equipment]]		[[Bild:Passive-innerloads_nonres_offequipment.png\|thumb\|right\|Office equipment]]
	Any office equipment can be enumerated here. WUFI itself knows the following devices: PC, monitor, copier, printer, server and the telephone system. If different ones are needed, they can be inserted in the "user defined" scope. "User defined" devices can not be attached to a utilization pattern, ~~therefor~~ the utilization hours/year have to be given.<br>		Any office equipment can be enumerated here. WUFI itself knows the following devices: PC, monitor, copier, printer, server and the telephone system. If different ones are needed, they can be inserted in the "user defined" scope. "User defined" devices can not be attached to a utilization pattern, therefore the utilization hours/year have to be given.<br>
	The printer and copier also have an additional data section. The hours of utilization in energy saveing mode in hours/year can be defined, but are optional.		The printer and copier also have an additional data section. The hours of utilization in energy saveing mode in hours/year can be defined, but are optional.
	<br style="clear:both" />		<br style="clear:both" />

SebSta: /* Occupancy */

2013-07-23T13:43:52Z

Occupancy

← Nächstältere Version		Version vom 23. Juli 2013, 15:43 Uhr
Zeile 16:		Zeile 16:
	=== Occupancy ===		=== Occupancy ===
	[[Bild:Passive-innerloads_nonres_occupancy.png\|right\|thumb\|Occupancy]]		[[Bild:Passive-innerloads_nonres_occupancy.png\|right\|thumb\|Occupancy]]
	Here ~~it is defined how many~~ occupants the building ~~has~~ as well as ~~additional~~ humidity sources. When it comes to the activity of the occupants, WUFI can differ between children, sitting adults and standing adults. It is also possible to define the pattern for these people as well the quantity of people following this pattern. <br>		Here the number of occupants of the building is defined as well as its humidity sources. When it comes to the activity of the occupants, WUFI can differ between children, sitting adults and standing adults. It is also possible to define the pattern for these people as well the quantity of people following this pattern. <br>
	The additional data section contains a value about additional heat losses through evaporation and toilet usage/settings.<br>		The additional data section contains a value about additional heat losses through evaporation and toilet usage/settings.<br>
	If the simulated building is a school, WUFI has default values for it.		If the simulated building is a school, WUFI has default values for it.

SebSta: /* Residential building */

2013-07-23T13:25:54Z

Residential building

← Nächstältere Version		Version vom 23. Juli 2013, 15:25 Uhr
Zeile 6:		Zeile 6:
	[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>		[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>
	For each device, the quantity and the energy demand are needed and depending on the devices itself, additional data is needed: E.g. the dishwasher can be connected with the DHW or cold water.<br>		For each device, the quantity and the energy demand are needed and depending on the devices itself, additional data is needed: E.g. the dishwasher can be connected with the DHW or cold water.<br>
	In case the inner sources of the building are not known yet, WUFI contains a standard set of devices in a common household which can be used by clicking on "standart dataset.		In case the inner sources of the building are not known yet, WUFI contains a standard set of devices in a common household which can be used by clicking on "standart dataset".
	<br style="clear:both" />		<br style="clear:both" />

SebSta: /* Residential building */

2013-07-23T13:25:46Z

Residential building

← Nächstältere Version		Version vom 23. Juli 2013, 15:25 Uhr
Zeile 6:		Zeile 6:
	[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>		[[Bild:Passive-innerloads_scope.png\|Device scope\|right]]<br>
	For each device, the quantity and the energy demand are needed and depending on the devices itself, additional data is needed: E.g. the dishwasher can be connected with the DHW or cold water.<br>		For each device, the quantity and the energy demand are needed and depending on the devices itself, additional data is needed: E.g. the dishwasher can be connected with the DHW or cold water.<br>
	In case the inner sources of the building are not known yet, WUFI contains a standard ~~amount~~ of devices in a common household which can be used by clicking on "standart dataset.		In case the inner sources of the building are not known yet, WUFI contains a standard set of devices in a common household which can be used by clicking on "standart dataset.
	<br style="clear:both" />		<br style="clear:both" />