Plus 2.X:Dialog Climate - Versionsgeschichte

Krizzl am 27. März 2012 um 14:50 Uhr

2012-03-27T14:50:15Z

Krizzl: /* Optional Climate */

2012-03-26T14:13:51Z

Optional Climate

← Nächstältere Version		Version vom 26. März 2012, 16:13 Uhr
Zeile 102:		Zeile 102:
	There are several ways to define or select a climate. By clicking on "New" a new optional climate it created. In the drop-down menu several options can be selected for defining the climate.		There are several ways to define or select a climate. By clicking on "New" a new optional climate it created. In the drop-down menu several options can be selected for defining the climate.
	*"File based" refers to a previously uploaded climate file in "Files/Measured Data". Simple temperature and moisture profiles can be specified as a sine curve. The generation of an internal climate of the selected outdoor air is possible. The file-based climate must now be assigned to the appropriate parameters. Therefore, the data previously stored in "Files/Measured Data" will be selected. <br>		*"File based" refers to a previously uploaded climate file in "Files/Measured Data". Simple temperature and moisture profiles can be specified as a sine curve. The generation of an internal climate of the selected outdoor air is possible. The file-based climate must now be assigned to the appropriate parameters. Therefore, the data previously stored in "Files/Measured Data" will be selected. <br>
	For an optional climate in shape of a sine curve, the user has several predefined curves for temperature and relative humidity at his disposal.		For an optional climate in shape of a sine curve, the user has several predefined curves for temperature and relative humidity at his disposal:
	*Climates in accordance with EN 13 788 (DIN EN ISO 13788 2001): Different classes are determined for the indoor temperature and humidity		*Climates in accordance with EN 13 788 (DIN EN ISO 13788 2001): Different classes are determined for the indoor temperature and humidity
	*EN 15025 (EN 15026 2007) allows a choice of moisture load		*EN 15025 (EN 15026 2007) allows a choice of moisture load

Krizzl: /* Optional Climate */

2012-03-26T14:13:35Z

Optional Climate

← Nächstältere Version		Version vom 26. März 2012, 16:13 Uhr
Zeile 100:		Zeile 100:
	=== Optional Climate ===		=== Optional Climate ===

	There are several ways to define or select a climate. By clicking on "New" a new optional climate it created. In the drop-down menu several options can be selected for defining the climate. "File based" refers to a previously uploaded climate file in "Files/Measured Data". Simple temperature and moisture profiles can be specified as a sine curve. The generation of an internal climate of the selected outdoor air is possible.		There are several ways to define or select a climate. By clicking on "New" a new optional climate it created. In the drop-down menu several options can be selected for defining the climate.
			*"File based" refers to a previously uploaded climate file in "Files/Measured Data". Simple temperature and moisture profiles can be specified as a sine curve. The generation of an internal climate of the selected outdoor air is possible. The file-based climate must now be assigned to the appropriate parameters. Therefore, the data previously stored in "Files/Measured Data" will be selected. <br>
	The file-based climate must now be assigned to the appropriate parameters. Therefore, the data previously stored in "Files/Measured Data" will be selected. For an optional climate ~~after~~ a sine curve, the user has several predefined curves for temperature and relative humidity at his disposal. ~~The curves can also be user defined. This selection is taken on a drop-down menu. The climates~~ in accordance with EN 13 788 (DIN EN ISO 13788 2001), EN 15025 (EN 15026 2007) or ASHRAE 160 (ANSI / ASHRAE 160 2009) are derived from the respective standards. For the EN 13 788, for the indoor temperature and humidity different classes are determined. Similarly, the climate to EN 15026 allows a choice of moisture load. The parameters that can be determined by ASHRAE 160 are extensive. In the field of temperature, the type of climate control is selected. Set values must be specified. The moisture can be determined by ASHRAE 160 to the number of bedrooms, or custom. In this selection, even an air exchange rate must be entered.		For an optional climate in shape of a sine curve, the user has several predefined curves for temperature and relative humidity at his disposal.
			*Climates in accordance with EN 13 788 (DIN EN ISO 13788 2001): Different classes are determined for the indoor temperature and humidity
			*EN 15025 (EN 15026 2007) allows a choice of moisture load
			*ASHRAE 160 (ANSI / ASHRAE 160 2009): The parameters that can be determined by ASHRAE 160 are extensive. In the field of temperature, the type of climate control is selected. Set values must be specified. The moisture can be determined by ASHRAE 160 to the number of bedrooms, or custom. In this selection, even an air exchange rate must be entered.
			*The curves can also be user defined

	[[Bild:WUFI-Plus_optionalClimate.jpg]]		[[Bild:WUFI-Plus_optionalClimate.jpg]]

Krizzl: /* External Climate */

2012-03-26T14:09:24Z

External Climate

← Nächstältere Version		Version vom 26. März 2012, 16:09 Uhr
Zeile 78:		Zeile 78:

	<P>		<P>
	<B>"~~Userdefined~~ file":</B>		<B>"User defined file":</B>
	</P>		</P>

Zeile 89:		Zeile 89:
	* .wbc		* .wbc
	* .kli		* .kli

			Click [[Details:Climate\|here]] for more information on user defined climate files.


	If your weather file is in .txt format you have to load it with <B>"Files / Measured Data"</B> and define it as an optional climate.		If your weather file is in .txt format you have to load it with <B>"Files / Measured Data"</B> and define it as an optional climate.

Krizzl: /* External Climate */

2012-03-26T14:07:30Z

External Climate

← Nächstältere Version		Version vom 26. März 2012, 16:07 Uhr
Zeile 20:		Zeile 20:

	<P>		<P>
	The adjacent climates of the different components may be assigned only for the outside surface of the component. The boundary condition on the outside of the component ~~don~~'t have to be an external climate. If the heated zone of the building is bordering to another flat or room the external climate can be changed to an [[Plus:Dialog_Climate#Optional Climate \| optional climate]].		The adjacent climates of the different components may be assigned only for the outside surface of the component. The boundary condition on the outside of the component doesn't have to be an external climate. If the heated zone of the building is bordering to another flat or room the external climate can be changed to an[[Plus:Dialog_Climate#Optional Climate \| optional climate]].
	</P>		</P>

Krizzl: /* Optional Climate */

2012-03-26T09:25:36Z

Optional Climate

← Nächstältere Version		Version vom 26. März 2012, 11:25 Uhr
Zeile 97:		Zeile 97:
	=== Optional Climate ===		=== Optional Climate ===

	There are several ways to define or select a climate. By clicking on "New" a new optional climate it created. In the drop-down menu can be selected ~~among several options~~ for defining the climate. "File based" refers to a previously in "Files/Measured Data" ~~uploaded climate file~~. Simple temperature and moisture profiles can be specified as a sine curve. The generation of an internal climate of the selected outdoor air is possible.		There are several ways to define or select a climate. By clicking on "New" a new optional climate it created. In the drop-down menu several options can be selected for defining the climate. "File based" refers to a previously uploaded climate file in "Files/Measured Data". Simple temperature and moisture profiles can be specified as a sine curve. The generation of an internal climate of the selected outdoor air is possible.

	The file-based climate must now be assigned the appropriate parameters. Therefore, the previously stored ~~data~~ in "Files/Measured Data" will be selected. For an optional climate after a sine curve, the user has several predefined curves for temperature and relative humidity ~~available~~. The curves can also be user defined. This selection is taken on a drop-down menu. The climates in accordance with EN 13 788 (DIN EN ISO 13788 2001), EN 15025 (EN 15026 2007) or ASHRAE 160 (ANSI / ASHRAE 160 2009) are derived from the respective standards. For the EN 13 788, the indoor temperature and humidity different classes are determined. Similarly, the climate to EN 15026 allows a choice of moisture load. The parameters that can be determined by ASHRAE 160 are extensive. In the field of temperature, the type of climate control is selected. Set values must be specified. The moisture can be determined by ASHRAE 160 to the number of bedrooms, or custom. In this selection, even an air exchange rate must be entered.		The file-based climate must now be assigned to the appropriate parameters. Therefore, the data previously stored in "Files/Measured Data" will be selected. For an optional climate after a sine curve, the user has several predefined curves for temperature and relative humidity at his disposal. The curves can also be user defined. This selection is taken on a drop-down menu. The climates in accordance with EN 13 788 (DIN EN ISO 13788 2001), EN 15025 (EN 15026 2007) or ASHRAE 160 (ANSI / ASHRAE 160 2009) are derived from the respective standards. For the EN 13 788, for the indoor temperature and humidity different classes are determined. Similarly, the climate to EN 15026 allows a choice of moisture load. The parameters that can be determined by ASHRAE 160 are extensive. In the field of temperature, the type of climate control is selected. Set values must be specified. The moisture can be determined by ASHRAE 160 to the number of bedrooms, or custom. In this selection, even an air exchange rate must be entered.

	[[Bild:WUFI-Plus_optionalClimate.jpg]]		[[Bild:WUFI-Plus_optionalClimate.jpg]]

Krizzl am 26. März 2012 um 09:20 Uhr

2012-03-26T09:20:32Z

← Nächstältere Version		Version vom 26. März 2012, 11:20 Uhr
Zeile 1:		Zeile 1:
	At its surfaces the building component is exposed to the		At its surfaces the building component is exposed to the <B>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],
	<B>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],		WUFI needs data for each time step on rain and radiation load as well as on the exterior and interior temperature and on the exterior and interior relative humidity.
	WUFI needs for each time step ~~data~~ on ~~the~~ rain and radiation load, on the exterior
	and interior temperature and on the exterior and interior relative humidity.
	~~</P>~~
	<P>		<P>
	The designed building in WUFI-Plus ~~has on the outer facade contact to~~ the '''external climate'''. Each of the surfaces of the components must be assigned ~~its~~ respective boundary conditions. ~~But here~~ it is possible to assign a [[Plus:Dialog_Climate#External Climate \| '''external climate''']] or an [[Plus:Dialog_Climate#Optional Climate \| '''optional climate''']].		The designed building in WUFI-Plus touches the '''external climate''' with its outer side. Each of the surfaces of the components must be assigned to their respective boundary conditions.

			In the Climate section it is possible to assign an [[Plus:Dialog_Climate#External Climate \| '''external climate''']] or an [[Plus:Dialog_Climate#Optional Climate \| '''optional climate''']].
	</P>		</P>

Zeile 20:		Zeile 20:

	<P>		<P>
	The ~~adjacently~~ climates on the different components may be assigned only for the outside surface		The adjacent climates of the different components may be assigned only for the outside surface of the component. The boundary condition on the outside of the component don't have to be an external climate. If the heated zone of the building is bordering to another flat or room the external climate can be changed to an [[Plus:Dialog_Climate#Optional Climate \| optional climate]].
	of the component. The boundary condition on the outside of the component have ~~not~~ to be an external climate. If the heated zone of the building is ~~boardering~~ to another flat or room the external climate can be ~~change~~ to an [[Plus:Dialog_Climate#Optional Climate \| optional climate]].
	</P>		</P>

Zeile 35:		Zeile 34:
	</P>		</P>
	<P>		<P>
	The button <B>"Browse..."</B>		The button <B>"Browse..."</B> opens a dialog in which you can select the desired climate file
	opens a dialog in which you can select the
	desired climate file
	[[Plus:Dialog_SelectClimateFileFromMap \| on a map]] from a map.		[[Plus:Dialog_SelectClimateFileFromMap \| on a map]] from a map.

Krizzl am 26. März 2012 um 08:21 Uhr

2012-03-26T08:21:24Z

← Nächstältere Version		Version vom 26. März 2012, 10:21 Uhr
Zeile 1:		Zeile 1:
	At its surfaces the building component is exposed to the		At its surfaces the building component is exposed to the
	<P>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],		<B>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],
	WUFI needs for each time step data on the rain and radiation load, on the exterior		WUFI needs for each time step data on the rain and radiation load, on the exterior
	and interior temperature and on the exterior and interior relative humidity.		and interior temperature and on the exterior and interior relative humidity.

Krizzl am 26. März 2012 um 08:20 Uhr

2012-03-26T08:20:55Z

← Nächstältere Version		Version vom 26. März 2012, 10:20 Uhr
Zeile 1:		Zeile 1:
	At its surfaces the building component is exposed to the		At its surfaces the building component is exposed to the
	<B>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],		<P>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],
	WUFI needs for each time step data on the rain and radiation load, on the exterior		WUFI needs for each time step data on the rain and radiation load, on the exterior
	and interior temperature and on the exterior and interior relative humidity.		and interior temperature and on the exterior and interior relative humidity.

Krizzl am 13. Juli 2011 um 04:47 Uhr

2011-07-13T04:47:39Z

← Nächstältere Version		Version vom 13. Juli 2011, 06:47 Uhr
Zeile 1:		Zeile 1:
	~~= Dialog: Climate =~~
	~~<P>~~
	At its surfaces the building component is exposed to the		At its surfaces the building component is exposed to the
	<B>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],		<B>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],

← Nächstältere Version		Version vom 27. März 2012, 16:50 Uhr
Zeile 1:		Zeile 1:
	At its surfaces the building component is exposed to the <B>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],		At its surfaces the building component is exposed to the <B>climatic boundary conditions</B> which have a profound effect on its hygrothermic and inner climate behaviour. As discussed in the help topic [[Details:Climate\|Climate data]],
	~~WUFI~~ needs data for each time step on rain and radiation load as well as on the exterior and interior temperature and on the exterior and interior relative humidity.		WUFI®plus needs data for each time step on rain and radiation load as well as on the exterior and interior temperature and on the exterior and interior relative humidity.

	<P>		<P>
	The designed building in ~~WUFI-Plus~~ touches the '''external climate''' with its outer side. Each of the surfaces of the components must be assigned to their respective boundary conditions.		The designed building in WUFI®plus touches the '''external climate''' with its outer side. Each of the surfaces of the components must be assigned to their respective boundary conditions.

	In the Climate section it is possible to assign an [[Plus:Dialog_Climate#External Climate \| '''external climate''']] or an [[Plus:Dialog_Climate#Optional Climate \| '''optional climate''']].		In the Climate section it is possible to assign an [[Plus:Dialog_Climate#External Climate \| '''external climate''']] or an [[Plus:Dialog_Climate#Optional Climate \| '''optional climate''']].
Zeile 39:		Zeile 39:
	</P>		</P>
	<P>		<P>
	Once you have selected a climate file, ~~WUFI~~ will plot the temperature and the relative		Once you have selected a climate file, WUFI®plus will plot the temperature and the relative
	humidity. The thin curves show the data read from the climate file, the bold curves		humidity. The thin curves show the data read from the climate file, the bold curves
	represent the centered moving monthly means for easier visual accessibility.<BR>		represent the centered moving monthly means for easier visual accessibility.<BR>
Zeile 51:		Zeile 51:

	<P>		<P>
	Click on the button <B>"Analyze"</B> to start the analysis. ~~WUFI~~ will		Click on the button <B>"Analyze"</B> to start the analysis. WUFI®plus will
	display the minimum, maximum and mean values of temperature and relative humidity,		display the minimum, maximum and mean values of temperature and relative humidity,
	the normal (i.e. vertical) rain sum and the directional distributions of solar		the normal (i.e. vertical) rain sum and the directional distributions of solar
Zeile 81:		Zeile 81:
	</P>		</P>

	Choose this option if you want to use a Userdefined file. With the button <B>"Browse..."</B> you can select the directory. ~~WUFI~~ can read:		Choose this option if you want to use a Userdefined file. With the button <B>"Browse..."</B> you can select the directory. WUFI®plus can read:
	* .wet		* .wet
	* .try		* .try