Plus:TreeHeatedSpace

Components/Geometry

When the project building is edited in Building Wizard or by Script file all componets are listed in the Components/Geometry elemtent. The area, the orientation and inclination are indicated. The components are arranged by stories and orientation in the Navigation Tree and can be selected here for entering the necessary inputs.

Single Component

The inputs for the single components can be entered here. In the different tab layer the assebly, the surface and initial conditions for the component are to define. You may name the component well defined. After the calculation you can see the reluts concerning only this component in the tab layer Results.

Component with Window

Either with a right click on the component or a klick on the New window button a window can be inserted.

The geometry of the window can be edited easy by defining position and dimension.

Then the window is to assign with the according window type.

Additional Inner Components

Under the Additional inner components you can add components inside your heated space. For exaple walls inside the balaced zone. These components can be edit in this dialog. Similar to the compontents of the geometry you can define General Data like the denomination and the area of the additional component. The assembly can be chosen as well as surface deatils. Also the initial conditions and the numeric settings can be done. And as in the other components you can give out the specific results for the additional component after calculation in tab layer Results.