Plus:Dialogs

Overview of WUFI's Dialog Structure

This list contains a description of all menu items and of all dialogs, including dialogs which are not directly accessible via the menus, but as sub-dialogs of other dialogs:

Project:

• New

Wipes WUFI's memory clean and starts a new, empty project.
 
The project dialog opens which allows you to give a name to the project and which serves as a memo pad for some administrative project info.
 

• Open

Displays the usual 'Open' dialog from which you can open existing project files (which contain the input data and the calculation results, if any).
 

• Reopen

Displays a list of projects you have previously worked with so that you can easily open them by simply selecting them from this list.
 

• Save

Saves the input data and (after a calculation has been performed) the calculation results to the project file.
 
You should save the project before a calculation in case something goes wrong; you must save again after the calculation if you want to keep the results for later.
 

• Save As...

Saves the current project under a new name.
 
The old project file, if any, continues to exist under the old name.
 

• Exit

Closes WUFI. But why should you want to?
 

Inputs:

• Project Data
  Here you define all information of the project, includes the name and adress of the client and special remarks of the project.
• Case 1
  Here you define general information about the project and the time of calculation. Additional the button results shows the report of the calculation which is available after the calculation.
  
  • Climate
    This dialog serves to specify the weather acting on the outer boundaries of the building, respectively.
    Possible is to define a typical external climate or optional climates.
    
  • Building
    On this page you can find the building wizard which help you to design the building dimensions. And at this dialog the zones and attached zones get visible when the building is designed.
• Attached Zones
  This dialog shows the defined attached unheated zones of the building.

Options:

• Default Settings / Data
  To choose a default climate.

 

• Warnings
  Tell WUFI which events shall cause a warning.
  

 

• Other
  Three options can be choose here.
  
  • Start the software window with a full screen.
    
  • Save the results with the project file.
    
  • Include all graphs in results.
    

 

• Default Assemblies
  Define default assemblies for the components.

 

• Windows type
  Define default window types and save it in the Database.

Database:

• Database Materials
  View the material data contained in the materials database or add your own materials.
  • Database Materials - New Material
    Define a new material for inclusion in WUFI's materials database.
  • Database Materials - Change Material
    Edit one of the materials you have added to the database. (The predefined materials in the database cannot be edited.)
  • Database Materials - Delete
    Delete from the database one of the materials you have added. (The predefined materials in the database cannot be deleted.)
  • Database Materials - Edit Catalog
    Add or edit a database catalog.

• Database Assemblies
  View the constructions contained in the constructions database or add your own constructions.
  • Database Assemblies - New Construction
    Define a new construction for inclusion in WUFI's constructions database.
  • Database Assemblies - Change Construction
    Edit one of the constructions you have added to the database. (The predefined constructions in the database cannot be edited.)
  • Database Assemblies - Delete
    Delete from the database one of the constructions you have added. (The predefined constructions in the database cannot be deleted.)
  • Database Assemblies - Edit Catalogue
    Add or edit a database catalogue.
    

Here you define the assembly of the building component by specifying the layer sequence and the layer thicknesses as well as the material parameters of the individual layers.
You can also select an appropriate numerical grid, specify [Glossary:Glossary-1D | monitoring positions]] at locations where the hygrothermal behavior of the component shall be analysed in detail, and add hygrothermal sources and sinks to the component.

• • Material Data
    This dialog displays the material data for the highlighted layer and allows you to edit them.
  • Material Database
    In this dialog you can select the material data for the highlighted layer from the material database.
  • Example Cases
    In this dialog you can select an assembly from the construction database and transfer it to the assembly dialog.
  • Hygrothermal Sources
    You can specify heat, moisture and air change sources (or sinks) for the highlighted layer.
    • Edit Hygrothermal Sources
      Specify the location and the properties of the sources.

 

• Orientation / Inclination / Height
  This dialog serves to define the orientation, inclination and height of the building component. These data are needed to calculate the rain and radiation loads incident on the surface.
  

 

• Surface Transfer Coefficients
  In this dialog you define the surface transfer coefficients, such as the heat transfer coefficient, the radiation absorptivity, rain reduction factor etc.
  

 

• Initial Conditions
  The initial temperature and moisture distributions are specified in this dialog (e.g. a dry component or one with trapped construction moisture).
  • Initial Moisture
  • Initial Temperature
    These dialogs serve to specify initialisation files which describe the initial moisture or temperature profiles in the component, if these are to be read from files.
    
• Calculation Period / Profiles
  Here you tell WUFI for which period of time the simulation shall be carried out (e.g. the simulation is to span one year, starting on June 1st).
  

 
You can also specify the width of the time steps used for the calculation.
 

• Numerics
  The options offered by this dialog allow you to control the way the calculation is done.
  

 

• Climate: Outdoor (Left Side)
• Climate: Indoor (Right Side)
  These dialogs serve to specify the weather acting on the left or right side of the component, respectively.
  • Map/File
    If you want to read the climate data from a file, use this tab to specify and analyse the file.
    • Select Climate File
      Select the desired climate file:
      • Select from map
        If you want to use one of the climate files supplied with WUFI, specify it by clicking on the respective location on the map.
      • Select user-defined file
        If you want to use a climate file from a different source, select it with the file browser
    • Detailed Options
      Depending on the climate file type, additional options may be available.
  • Sine Curves
    You may use simple sine curves as climate conditions.
  • EN 13788
    You may have the interior climate derived from the exterior climate by the method described in DIN EN ISO 13788.
  • EN 15026
    You may have the interior climate derived from the exterior climate by the method described in EN 15026.
  • ASHRAE 160P
    You may have the interior climate derived from the exterior climate by the method described in ASHRAE Standard 160P.

Run

• Run Calculation
  Starts the calculation for the current case, but shows only a progress bar instead of the film.
  

 

• Run all Calculations
  Starts the calculation for all cases in the project in succession and only shows a progress bar instead of the film.
  

 

• Run Calculation with Film
  Open this dialog to start the calculation and watch the thermal and hygric processes going on in the component during the simulation (the 'film').
  • Run Calculation - Properties
    This subdialog lets you configure the film display.
    

 

Outputs

• Quick Graph
  The quick graphs give you a quick overview of the calculation results.
  

 

• Input Data Summary / Last Calculation
  This dialog displays data sheets with the input data (such as the assembly and the material data) and a summary of the calculation results, formatted for printing.
  • Input Data Summary - Options
    Use this dialog to select the data that shall be included in the Input Data Summary.
    

 

• Status: Last Calculation
  This dialog displays a short summary of the calculation results.
  It is automatically displayed at the end of the calculation. You should check the provided info (in particular, the water balance) to make sure no numerical problems have occurred.
  

 

• Result Graphs
  This dialog displays the calculation results in the form of graphs showing courses and profiles, formatted for printing.
  • Page Setup
    This dialog allows you to edit the name of the highlighted graphics page.
  • Graph Setup, Courses
    Here you can edit the settings for a graph that displays courses.
  • Graph Setup, Profiles
    Here you can edit the settings for a graph that displays profiles.
  • Curves Setup
    Here you can edit the settings for a curve.
  • Insert Curves
    Here you can assign additional curves showing calculation results to the current graph.
  • Delete Curves
    Here you can remove a curve from the current graph.

• View Film
  This dialog displays the calculation results in the form of a film showing the thermal and hygric processes in the building component as an animation.
  

 

• Measured Data
  Here you can specify a file with measured data. You can configure the result graphs to show them together with the WUFI results, allowing easy comparison of calculation and measurement.
  

 

• ASCII Export
  Instead of viewing the results with WUFI's graphics dialog, you may also write them to an ASCII file and analyse them on your own.
  

 

• Export Film
  You can export the film and display it with an external film viewer (in WUFI Pro only).
  

 

Options

• Unit System
  Switch between SI and IP units.
  

 

• Warnings
  Tell WUFI which events shall cause a warning.
  

 

• Result Data
  Exclude the calculated courses/profiles or the film data from being saved in the project file.
  

 

Database

• Database Materials
  View the material data contained in the materials database or add your own materials.
  • Database Materials - New Material
    Define a new material for inclusion in WUFI's materials database.
  • Database Materials - Change Material
    Edit one of the materials you have added to the database. (The predefined materials in the database cannot be edited.)
  • Database Materials - Delete
    Delete from the database one of the materials you have added. (The predefined materials in the database cannot be deleted.)
  • Database Materials - Edit Catalog
    Add or edit a database catalog.

• Database Constructions
  View the constructions contained in the constructions database or add your own constructions.
  • Database Constructions - New Construction
    Define a new construction for inclusion in WUFI's constructions database.
  • Database Constructions - Change Construction
    Edit one of the constructions you have added to the database. (The predefined constructions in the database cannot be edited.)
  • Database Constructions - Delete
    Delete from the database one of the constructions you have added. (The predefined constructions in the database cannot be deleted.)
  • Database Constructions - Edit Catalog
    Add or edit a database catalog.
    

?

The on-line help.

• General
  Opens the [[Welcome.htm">welcome page]] of the on-line help. You can use the arrows on each page to systematically browse the help topics.
• Content
  Opens the <A HREF="Contents.htm">contents</A> page of the on-line help.
• Index/Search
  Opens the keyword list of the on-line help for searching.
• Use Help
  Explains how to use the on-line help.
• IBP on the Web
  Opens the WUFI homepage in your browser.
• WUFI Forum
  Opens the WUFI Forum in your browser.
• About WUFI
  Displays information about WUFI, including the version number.

Tool Bar

The following menu items are also available via the toolbar buttons:

Create New Project

Open Project File

Save Project File

Create New Case

Remove Case

Run Calculation for current case without film display

Run Calculation for all cases in the project without film display

Run Calculation with film display

Show Summary of Input Data

Show Status of Last Calculation

Show Result Graphs

View Film

Open On-Line Help