2D:Installation: Unterschied zwischen den Versionen
Aus Wufiwiki
Zur Navigation springenZur Suche springen
Len (Diskussion | Beiträge) |
Tom (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
| (3 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt) | |||
| Zeile 1: | Zeile 1: | ||
= Installing WUFI-2D = | = Installing WUFI-2D = | ||
The menu-driven PC program WUFI® ( | The menu-driven PC program '''WUFI®''' ('''W'''ärme '''u'''nd '''F'''euchte '''i'''nstationär - Transient Heat and Moisture), developed by IBP and validated using data derived from outdoor and laboratory tests, allows realistic calculation of the transient hygrothermal behaviour of multi-layer building components exposed to natural climate conditions. | ||
WUFI® is based on the newest findings regarding vapour diffusion and liquid transport in building materials. | |||
WUFI® only requires standard material properties and easy-to-determine moisture storage and liquid transport functions. | '''WUFI®''' is based on the newest findings regarding vapour diffusion and liquid transport in building materials. | ||
WUFI® can use measured weather data - including driving rain and solar radiation - as boundary conditions, thus allowing realistic investigations on the behaviour of the component under exposure to natural weather. | |||
'''WUFI®''' only requires standard material properties and easy-to-determine moisture storage and liquid transport functions. | |||
'''WUFI®''' can use measured weather data - including driving rain and solar radiation - as boundary conditions, thus allowing realistic investigations on the behaviour of the component under exposure to natural weather. | |||
'''WUFI® can be used for assessing''' | '''WUFI® can be used for assessing''' | ||
| Zeile 13: | Zeile 16: | ||
* the hygrothermal performance of roof and wall assemblies under unanticipated use or in different climate zones. | * the hygrothermal performance of roof and wall assemblies under unanticipated use or in different climate zones. | ||
== | == Computer Requirements: == | ||
* IBM-compatible Pentium-class computer. | * IBM-compatible Pentium-class computer. High speed is recommended for performance. | ||
* At least 128 MB of random access memory (RAM). | * At least 128 MB of random access memory (RAM). | ||
* Microsoft Windows 2000TM or XPTM | * Microsoft Windows 2000TM or XPTM | ||
| Zeile 22: | Zeile 24: | ||
* Additional 500 megabytes min. for the calculation results | * Additional 500 megabytes min. for the calculation results | ||
== | == Installing the Program: == | ||
In order to install WUFI you need to have the system administrator rights. Put the program installation CD in the appropriate CD drive and follow the instructions. | In order to install WUFI you need to have the system administrator rights. Put the program installation CD in the appropriate CD drive and follow the instructions. | ||
Aktuelle Version vom 30. Oktober 2008, 13:29 Uhr
Installing WUFI-2D
The menu-driven PC program WUFI® (Wärme und Feuchte instationär - Transient Heat and Moisture), developed by IBP and validated using data derived from outdoor and laboratory tests, allows realistic calculation of the transient hygrothermal behaviour of multi-layer building components exposed to natural climate conditions.
WUFI® is based on the newest findings regarding vapour diffusion and liquid transport in building materials.
WUFI® only requires standard material properties and easy-to-determine moisture storage and liquid transport functions.
WUFI® can use measured weather data - including driving rain and solar radiation - as boundary conditions, thus allowing realistic investigations on the behaviour of the component under exposure to natural weather.
WUFI® can be used for assessing
- the drying time of masonry with trapped construction moisture
- the danger of interstitial condensation
- the influence of driving rain on exterior building components
- the effect of repair and retrofit measures
- the hygrothermal performance of roof and wall assemblies under unanticipated use or in different climate zones.
Computer Requirements:
- IBM-compatible Pentium-class computer. High speed is recommended for performance.
- At least 128 MB of random access memory (RAM).
- Microsoft Windows 2000TM or XPTM
- Java Runtime Environment 1.5 or higher
- Hard disk drive with at least 100 megabytes of available disk space.
- Additional 500 megabytes min. for the calculation results
Installing the Program:
In order to install WUFI you need to have the system administrator rights. Put the program installation CD in the appropriate CD drive and follow the instructions.
