Plus:HowTo

Simulation procedure

This is a short description of a simulation procedure. For detailed information to the several steps follow the links.

The elements of the navigation tree lead you step by step through all the necessary inputs.

• Project

Definition of general project information

• Files / Measured data

additional required data and other files are loaded into the program

• Case

remark alterations and characteristics of the current case variation define the simulation period

• Climate

Choose a climate for the boundary conditions. This can be either from the WUFIplus database or a user defined one Additional optional climates can be defined (e.g. ground, attached zones)

• Building

modelling the building. For plain geometries the building wizard can be used. It generates the geometry with a few inputs. For more complex geometries use the 3D Editor.

• Heated Zones

Create the several heated zones

• Zone

Define the stettings for the several zones.

• Visualized Components

allocate the components to the respective zone define the assemblies set the parameters for surface, initial conditions and numeric

• Inner Loads

occuring inner loads by machines or occupants can be defined by the hour

• Design Conditions

design conditions for the zone are defined by the hour as well. these values are setpoints for the HVAC system

• Other Parameters

• Attached Zones

• 3D-Objects

• Remaining elements

• HVAC

How Do I Use WUFI Plus?

The following will guide you through the process of setting up and performing a calculation with WUFI Plus, giving you a general impression of what you can do and how you can do it.

• Collecting the Necessary Data
• Defining the Component and the Numerical Grid
• Setting Numerical Parameters
• Summary: Preparing a Calculation
• Performing the Calculation
• Viewing the Results