2D:Installation

Installing WUFI-2D

This page describes the process of installing WUFI-2D and the folders that are created.

The menu-driven PC program WUFI® (Wärme und Feuchte instationär - Transient Heat and Moisture), developed by IBP and validated using data derived from outdoor and laboratory tests, allows realistic calculation of the transient hygrothermal behaviour of multi-layer building components exposed to natural climate conditions. WUFI® is based on the newest findings regarding vapour diffusion and liquid transport in building materials. WUFI® only requires standard material properties and easy-to-determine moisture storage and liquid transport functions. WUFI® can use measured weather data - including driving rain and solar radiation - as boundary conditions, thus allowing realistic investigations on the behaviour of the component under exposure to natural weather.

WUFI® can be used for assessing

• the drying time of masonry with trapped construction moisture
• the danger of interstitial condensation
• the influence of driving rain on exterior building components
• the effect of repair and retrofit measures
• the hygrothermal performance of roof and wall assemblies under unanticipated use or in different climate zones.

Computer Requirements:

• IBM-compatible Pentium-class computer.
• High speed is recommended for performance.
• At least 128 MB of random access memory (RAM).
• Microsoft Windows 2000TM or XPTM
• Java Runtime Environment 1.5 or higher
• Hard disk drive with at least 100 megabytes of available disk space.
• Additional 500 megabytes min. for the calculation results

Installing the Program:

In order to install WUFI you need to have the system administrator rights. Put the program installation CD in the appropriate CD drive and follow the instructions.