Passive:Results

Once you fed all information into WUFI®Passive, this page will give the results and will show you how your building does perform regarding the passive verification standarts.

You can find the Data & Result section by clicking on the Section button in the Tree.

Menu

The buttons in the menu work depending on which scope or which view you have chosen. Following 5 buttons work regardless of these options:

The Expand/Shrink Button enlarges the result page on full screen or shrinks it back on the usual size.

The Option Button lets you chose the colors of the Passive House Verification result page. Default values are grey and white.

Whole Width/Page: Clicking on one of those button will either use the whole width of the window to display the results (Width) or show the whole page you are looking at (Page).

There is not a lot to explain for the Zoom Buttons.

If you need the effects of the other buttons, you should go to Print Layout

Scope

• The Passive House Verification will give out detailed results, whether your house satisfies the standarts or not.
• The Project Data will give back the information given in the Project section in the Tree.
• The Climate tab shows some basic information about the outer climate, which can be changed here.
• Passive House Data: Passive House related information like building type, floor slab area, internal gains settings etc.
  

  Passive House Data
• Zones/Components: Summary of all components and its adjacent zones. Some output values would be U-Value of each component or the tfa.
• Assemblies: Overview on the assemblies used in the project. All important values on different layers and the whole assembly are displayed
• HVAC: Overview on the efficiencies of the HVAC system.
• Results: Sumamry of the most important building parameters, like heating demands/loads and U-Values.
  

  Results
• User defined: Here you can chose your own composition of information. Press this button and decide which part of result you want in your own assembly. The elements on the left are the displayed tabs. You can change them with drag'n'drop or the select all button. To finish your selection, press "OK".