Passive:Verification: Unterschied zwischen den Versionen
SebSta (Diskussion | Beiträge) |
SebSta (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
| Zeile 3: | Zeile 3: | ||
== Building Information == | == Building Information == | ||
The first section summarizes some general information about the building itself. | The first section summarizes some general information about the building itself. | ||
[[Bild:Passive-verification_building.png|right|thumb]]<br style="clear:both" /> | [[Bild:Passive-verification_building.png|right|thumb|Building information]]<br style="clear:both" /> | ||
== Passivehouse requirements == | == Passivehouse requirements == | ||
[[Bild:Passive-verification_requirements.png|right|thumb]] | [[Bild:Passive-verification_requirements.png|right|thumb|Passivehouse requirements]] | ||
The primary passive house requirements depend mostly on needed energy, mostly in the form of cooling and heating as well as primary energy demand. All values are given in a specific value (per square meter/feet) and in total. Heating and cooling demand also provide a peak value(month).<br style="clear:both" /> | The primary passive house requirements depend mostly on needed energy, mostly in the form of cooling and heating as well as primary energy demand. All values are given in a specific value (per square meter/feet) and in total. Heating and cooling demand also provide a peak value(month).<br style="clear:both" /> | ||
== Secondary Passivehouse Requirements == | == Secondary Passivehouse Requirements == | ||
[[Bild:Passive-verification_secondary.png|right|thumb]] | [[Bild:Passive-verification_secondary.png|right|thumb|Secondary requirements]] | ||
The scondary requirements consist of the HRV efficiency and a percentage chance of overheating of the building. Depending on the numbers WUFI®Passive will give recommendation if a seperate cooling system is needed or not.<br style="clear:both" /> | The scondary requirements consist of the HRV efficiency and a percentage chance of overheating of the building. Depending on the numbers WUFI®Passive will give recommendation if a seperate cooling system is needed or not.<br style="clear:both" /> | ||
== Building Elements == | == Building Elements == | ||
[[Bild:Passive-verification_buildingelements.png|right|thumb]] | [[Bild:Passive-verification_buildingelements.png|right|thumb|Building elements]] | ||
The building elements describes the influences of windows, HVAC systems and electric devices on the energy demand.<br> | The building elements describes the influences of windows, HVAC systems and electric devices on the energy demand.<br> | ||
=== Windows === | === Windows === | ||
| Zeile 24: | Zeile 24: | ||
== Heat Flow == | == Heat Flow == | ||
[[Bild:Passive-verification_heat_flow.png|right|thumb]] | [[Bild:Passive-verification_heat_flow.png|right|thumb|Heat flow]] | ||
Heat gains and losses are divided on different causes. <br> | Heat gains and losses are divided on different causes. <br> | ||
Heat gains are seperated into solar gains, [[Passive2:Inner_Loads|inner sources]], thermal bridges and mechanical heating.<br> <br> | Heat gains are seperated into solar gains, [[Passive2:Inner_Loads|inner sources]], thermal bridges and mechanical heating.<br> <br> | ||
| Zeile 31: | Zeile 31: | ||
== Climate == | == Climate == | ||
[[Bild:Passive-verification_climate.png|right|thumb]] | [[Bild:Passive-verification_climate.png|right|thumb|Climate]] | ||
Gives a summary of the information given in the [[Passive2:Dialog_Climate|localization/elimate]] section of the tree and also calulations of not given values (e.g. ground temperature) and puts it together into a graph.<br> | Gives a summary of the information given in the [[Passive2:Dialog_Climate|localization/elimate]] section of the tree and also calulations of not given values (e.g. ground temperature) and puts it together into a graph.<br> | ||
The second graph displays the solar radiation and its orientation.<br style="clear:both" /> | The second graph displays the solar radiation and its orientation.<br style="clear:both" /> | ||
== Calculation Parameters == | == Calculation Parameters == | ||
[[Bild:Passive-verification_calculation_parameters.png|right|thumb]] | [[Bild:Passive-verification_calculation_parameters.png|right|thumb|Calculation parameters]] | ||
Someone else might explain this better than i do.<br style="clear:both" /> | Someone else might explain this better than i do.<br style="clear:both" /> | ||
== Annual Heat/Cooling Demand == | == Annual Heat/Cooling Demand == | ||
[[Bild:Passive-verification_heatcooling_demand.png|right|thumb]] | [[Bild:Passive-verification_heatcooling_demand.png|right|thumb|Heat/Cooling demand]] | ||
Opposes annual heat gains and losses and thereby calculates the annual heat/cooling demand.<br style="clear:both" /> | Opposes annual heat gains and losses and thereby calculates the annual heat/cooling demand.<br style="clear:both" /> | ||
== Heating/Cooling Load == | == Heating/Cooling Load == | ||
[[Bild:Passive-verification_heatcooling_load.png|right|thumb]]Someone else might explain this better than i do.<br style="clear:both" /> | [[Bild:Passive-verification_heatcooling_load.png|right|thumb|Heat/Cooling load]]Someone else might explain this better than i do.<br style="clear:both" /> | ||
== Areas == | == Areas == | ||
[[Bild:Passive-verification_areas.png|right|thumb]]<br style="clear:both" /> | [[Bild:Passive-verification_areas.png|right|thumb|Areas]]<br style="clear:both" /> | ||
== Thermal Brigdes == | == Thermal Brigdes == | ||
[[Bild:Passive-verification_thermalbridges.png|right|thumb]] | [[Bild:Passive-verification_thermalbridges.png|right|thumb|Thermal bridges]] | ||
Summarizes all thermal bridges given in the [[Passive2:Tree_Thermal_Bridges|thermal bridge]] tab of the tree and its heat gains and losses.<br style="clear:both" /> | Summarizes all thermal bridges given in the [[Passive2:Tree_Thermal_Bridges|thermal bridge]] tab of the tree and its heat gains and losses.<br style="clear:both" /> | ||
== Windows == | == Windows == | ||
[[Bild:Passive-verification_windows.png|right|thumb]] | [[Bild:Passive-verification_windows.png|right|thumb|Windows]] | ||
Shows the number, orientation and specific values of all windows and their influence on the heat gains and losses. These results are used in the calculation of the [[Passive:Verification#Annual_Heat.2FCooling_Demand|heating and cooling demand]].<br style="clear:both" /> | Shows the number, orientation and specific values of all windows and their influence on the heat gains and losses. These results are used in the calculation of the [[Passive:Verification#Annual_Heat.2FCooling_Demand|heating and cooling demand]].<br style="clear:both" /> | ||
== Summary Building Envelope == | == Summary Building Envelope == | ||
[[Bild:Passive-verification_buildingenvelope.png|right|thumb]]Dimensions of all building elements as well as their U- or Psi-Value. Also the transmission losses of each element, which are also needed for the heat gain/loss statistic are given.<br> | [[Bild:Passive-verification_buildingenvelope.png|right|thumb|Building envelope]]Dimensions of all building elements as well as their U- or Psi-Value. Also the transmission losses of each element, which are also needed for the heat gain/loss statistic are given.<br> | ||
The respective shading effect of each orientation is given here too.<br style="clear:both" /> | The respective shading effect of each orientation is given here too.<br style="clear:both" /> | ||
== HVAC Systems == | == HVAC Systems == | ||
[[Bild:Passive-verification_hvac.png|right|thumb]] | [[Bild:Passive-verification_hvac.png|right|thumb|HVAC]] | ||
An enumeration of all HVAC systems and their influence on the DHW consumption, heat gains/losses and primary energy demand or a equivalenct CO2 emission.<br style="clear:both" /> | An enumeration of all HVAC systems and their influence on the DHW consumption, heat gains/losses and primary energy demand or a equivalenct CO2 emission.<br style="clear:both" /> | ||
== Ventilation == | == Ventilation == | ||
[[Bild:Passive-verification_ventilation.png|right|thumb]]Someone else might explain this better than i do.<br style="clear:both" /> | [[Bild:Passive-verification_ventilation.png|right|thumb|Ventilation]]Someone else might explain this better than i do.<br style="clear:both" /> | ||
== Electricity Demand - Auxiliary Electricity == | == Electricity Demand - Auxiliary Electricity == | ||
[[Bild:Passive-verification_auxelectricity.png|right|thumb]] | [[Bild:Passive-verification_auxelectricity.png|right|thumb|Auxiliary electricity]] | ||
A table containing the energy demand of all HVAC and all affiliated systems. <br style="clear:both" /> | A table containing the energy demand of all HVAC and all affiliated systems. <br style="clear:both" /> | ||
== Electricity Demand depending on building type == | == Electricity Demand depending on building type == | ||
=== Residential Building === | === Residential Building === | ||
[[Bild:Passive-verification_electricitydemand.png|right|thumb]]<br style="clear:both" /> | [[Bild:Passive-verification_electricitydemand.png|right|thumb|Residential]]<br style="clear:both" /> | ||
=== Non-residential Bulding === | === Non-residential Bulding === | ||
[[Bild:Passive-verification_electricitydemand_nonres.png|right|thumb|Non-residential]] | [[Bild:Passive-verification_electricitydemand_nonres.png|right|thumb|Non-residential]] | ||
== Internal Heat Gains == | == Internal Heat Gains == | ||
[[Bild:Passive-verification_intheatgains.png|right|thumb]]<br style="clear:both" /> | [[Bild:Passive-verification_intheatgains.png|right|thumb|Heat gains]]<br style="clear:both" /> | ||
== DHW and Distribution == | == DHW and Distribution == | ||
[[Bild:Passive-verification_dhw.png|right|thumb]]<br style="clear:both" /> | [[Bild:Passive-verification_dhw.png|right|thumb|DHW]]<br style="clear:both" /> | ||
Version vom 2. Juli 2013, 09:54 Uhr
Results of Passive House Verification
This page shows the different subpoint of the output of the Passive House Verification. To each subpoint there will be a short description of the output parameters as well as a screenshot.
Building Information
The first section summarizes some general information about the building itself.
Passivehouse requirements
The primary passive house requirements depend mostly on needed energy, mostly in the form of cooling and heating as well as primary energy demand. All values are given in a specific value (per square meter/feet) and in total. Heating and cooling demand also provide a peak value(month).
Secondary Passivehouse Requirements
The scondary requirements consist of the HRV efficiency and a percentage chance of overheating of the building. Depending on the numbers WUFI®Passive will give recommendation if a seperate cooling system is needed or not.
Building Elements
The building elements describes the influences of windows, HVAC systems and electric devices on the energy demand.
Windows
The graphic shows the heat losses and gains of solar radiation through windows depending on the orientation. Also average values over all windows are given together with the total glazing area.
HVAC
The energy demand of all HVAC devices is listed here.
Electricity
The energy demand of all other electric devices is listed here.
Heat Flow
Heat gains and losses are divided on different causes.
Heat gains are seperated into solar gains, inner sources, thermal bridges and mechanical heating.
Heat losses are seperated into windows&doors, the building envelope and natural and mechanical ventilation.
Both statistics are displayed in a pie chart.
Climate
Gives a summary of the information given in the localization/elimate section of the tree and also calulations of not given values (e.g. ground temperature) and puts it together into a graph.
The second graph displays the solar radiation and its orientation.
Calculation Parameters
Someone else might explain this better than i do.
Annual Heat/Cooling Demand
Opposes annual heat gains and losses and thereby calculates the annual heat/cooling demand.
Heating/Cooling Load
Someone else might explain this better than i do.
Areas
Thermal Brigdes
Summarizes all thermal bridges given in the thermal bridge tab of the tree and its heat gains and losses.
Windows
Shows the number, orientation and specific values of all windows and their influence on the heat gains and losses. These results are used in the calculation of the heating and cooling demand.
Summary Building Envelope
Dimensions of all building elements as well as their U- or Psi-Value. Also the transmission losses of each element, which are also needed for the heat gain/loss statistic are given.
The respective shading effect of each orientation is given here too.
HVAC Systems
An enumeration of all HVAC systems and their influence on the DHW consumption, heat gains/losses and primary energy demand or a equivalenct CO2 emission.
Ventilation
Someone else might explain this better than i do.
Electricity Demand - Auxiliary Electricity
A table containing the energy demand of all HVAC and all affiliated systems.
Electricity Demand depending on building type
Residential Building
Non-residential Bulding
Internal Heat Gains
