Passive2:Ventilation
Utilization pattern
This section defines the utilization pattern of the ventilation system. If you have different patterns for different rooms, this is the place to create them. They get assigned to the different rooms in the "rooms ventilation" tab.
Additionaly it is possible to define a daily operation schedule with different air flow rates and associated running hours.
Rooms ventilation
In this tab all ventilated rooms are assigned with an utilization pattern of the ventilation. You can define all rooms by yourself or use the standart dataset by WUFI, which contains each one kitchen, bathroom, shower and a restroom.
Also the design volume flow rate of supply and exhaust air needs to be given. WUFI will then calculate an average volume flow rate depending on the given utilization pattern and its operation schedule.
For each room you have to input the area and the room height in the "additional data" section. In the last row of the table, WUFI will then calculate the average air change rate of the room.
Summer ventilation
This section needs to be seen by someone else. There are unfortunately no tooltips in the windows.
