Passive2:PH case

The PH case tab in the tree contains a lot of important data for the Passive House Verification such as building category, ventilation data and the foundation interface.

General

In this section you can select your building category
and the occupancy type depending on which category you want to calculate. There are different pick options, depending if you want to simulate a residential building or a non-residential one.

This choice has influence on the predefined internal loads.

The indoor temperature defines the mean indoor temperature during the heating period. The tooltip recommends 20°C (68°F) for residential buildings and for non-residential buildings, the calculation method is described in EN 13790.